Skylight leaks
Water around a roof window
Drip edge is the L-shaped metal at the eaves and rakes that throws water clear of the fascia and into the gutter. Without it, water tracks back along the underside of the shingle edge and runs down the fascia board, which is the single most common reason fascia rots. It is inexpensive, it is required by most current codes, and it is routinely missing on older roofs — so it is worth checking whenever fascia or gutter work is being done.
Winterville sits in the eastern part of the state where the housing stock is the defining factor. Clarke County has a wide spread of roof ages, from pre-war homes with original framing to recent subdivisions, and the leak profile differs sharply between them. Older properties leak at chimney flashing and valleys where decades of movement have opened joints that were never designed to flex. Newer ones leak at penetrations — boots, vents and skylights — where installation shortcuts show up five to ten years later. Summer storms bring wind and hail through on the same line that hits central Georgia, so both add storm damage on top.
Winterville has a population of about 1,201, and the housing stock here sets the pattern for what fails first on a roof.
It is why the fascia rots. Water clings to the underside of the shingle edge and tracks back onto the timber instead of dropping into the gutter. Retrofitting it is cheap compared with replacing fascia repeatedly.
At the eaves it can often be slid under the first shingle course. At the rakes it needs to go under the underlayment, which usually means lifting the edge courses. Both are localised jobs.
Water around a roof window
Fasteners, washers and seams
The metal that seals every joint
Concrete and clay tile
Bruising and granule loss
Lifting panels for roof work
You will get a straight answer on whether Winterville needs someone out today or whether it can wait — before anyone quotes you for anything.
Call (229) 235-1425